Front Panel Indicator Lights

Connect the AC power cord to the chassis power AC socket (⑧); then use your fingers to push the outlet hole cover from the outside of the chassis inward to open the outlet hole (④); The outlet hole (④) penetrates into the chassis and connects to the output terminal (⑤⑥); insert the AC power cord plug into the mains socket, the chassis power LED lights red after power on (①); finally, turn on the output control switch ( ③), pull the switch from "O" to "I", the LED indicators of each terminal and the green light of the chassis power supply are on. After the above operations are completed, the chassis power supply starts to work.
Connect AC cable to AC Socket (⑧) ; Knock out the wire connecting holes from outside (④), connect DC cables with output terminals(⑤⑥) through wire connecting holes(④); Plug AC power cord into mains AC socket, Red indicator lights up(①); finally, turn on the ON/OFF switch.(③) from “O” to “I”, each individual LED indicators lights up, power supply work normally.

Red front panel indicator means power is being supply from the wall outlet
Green front panel indicator means the power supply unit is powered on
Individual terminal indicators mean that the terminal is supplying power