Accessories || WB5802 & WB5806 Wireless Bridges
LED Indicator Lights
Power: Indicates the device is receiving power.
WLAN: Indicates that its wireless capabilities are active.
LAN: Getting data through LAN1 (Black RJ45 Port)
LAN2: Getting data through LAN2 (Yellow RJ45 Port)
Wireless Strength 1-4:
- 1st light: Signal is very weak.
- 1st, 2nd light: Signal is weak.
- 1st, 2nd, 3rd light: Signal is adequate.
- All 4 lights: Optimal signal
- ONLY 4th light: The signal is too strong, the devices are too close together or their is a lot of signals bouncing in the area.
Dip Switch Setup
Ideal Mounting
Line of sight is required, you do not need to scope it, simply go off of the signal strength lights. Ideally you would have all four lights on, but three is adequate.
WB5802 - Is pole mountable and comes with a wall mount bracket.
WB5806 - Is pole mount only.
Manual
Related Articles
Accessories || WB5802 & WB5806 Wireless Bridges Physical Parts
WB5802 Joint can be attached to pole mount accessory or the wall mount adapter included. WB5806 WB-BRACKET (SOLD SEPARATELY)Reyee Wireless || Add Wireless Bridges Through Wired Connection || Web GUI
Ruijie Reyee || Add Wireless Bridges Through Wired Connection || Web GUI In the event in which you are adding Reyee Wireless Bridges to a closed network that does not have a Internet /DHCP server you wilill breed to manually address the Wireless ...Reyee General || Phone Setup for Wireless Bridge Configuration ||
Reyee || Wireless Bridge Configuration || Phone Setup When setting up Point to Point or P2 Multipoint Wireless Bridges (WB) there are a few steps we recommend you complete before mounting the WB First verify the wireless bridge or bridges that will ...Reyee Mobile App || Wireless Bridge Setup || Ruijie Reyee
Rujiee Reyee || Wireless Bridge Setup || Ruijie APP First Create your account and then Add A Project Verify the Wireless bridge NVR and CPE side and Scan or add the Serial number of the NVR side wireless bridge to the project. App will ask again ...Reyee Wireless || Wireless Rate Limits || Web GUI
Ruijie Reyee || Wireless Rate Limits || Web GUI Log into your Reyee Cloud Account and then navigate to the Project you will be adding Wireless Rate limits to Once in the project you will hover Device Config. > Wireless then select Rate Limit You will ...