Akuvox Cloud || My MobileKey: Opening Door With My MobileKey
My MobileKey: Opening Door With My MobileKey
After the pairing up, you can open the door hands-free.
To open the door:
-
Tap Open Door
or wave your hands near the control unit to open the door. A pop-up prompt will be displayed for the door opening success.
Note
-
Make sure your smartphone is within the range of the Bluetooth signal emitted by the control unit for the pairing, favorably 0-5 meters.
-
Keep a distance of 0.05m to 0.15m between you and the control unit when you open the door by waving your hand.
Related Articles
Akuvox Cloud || My MobileKey: Pairing Your App with Access Control Unit
My MobileKey: Pairing Your App with Access Control Unit To pair My MobileKey with the control unit via Bluetooth, you need to scan and pair up your app with the device near you using the authentication code. After that, you will be ready for the ...Akuvox Cloud || Akuvox Landline Cloud Feature configuration
For landline function, please log into your Akuvox Installer Cloud Account to enabled this feature. **Prerequisite: Landline is a premium feature and needs to be enabled for each project, valid landline phone number to be dialed and Akuvox devices ...Akuvox Cloud || How To Setup Motion Detection Settings for Door Phones
How To Setup Motion Detection Settings for Door Phones on Akuvox Cloud You can not only enable and disable motion detection on the door phone but also set up the device motion detection type and alert trigger delay if needed. Click on Motion Setting. ...Akuvox Cloud || How to Update Your My MobileKey App
How to Update Your My MobileKey App You can check your app version and update it if needed. To check and update your app: On the bottom taskbar, tap . Tap About, then tap Check for Update. it will turn to App Store or Google Play automatically, then ...Akuvox Cloud || How to reset the web password for single-button series door phone
Applicable model: R20A, R20B, R20K, R26, E11, E12 1. Reset password via Akuvox Cloud If the device is connected to Akuvox Cloud, then you can use autop parameters to reset the password: 1. Go to the device info page, click the ‘Info’ button. 2. On ...