Akuvox General || Akuvox A02S 12-Volt Output Configuration
Akuvox A02S 12-Volt Output Configuration
Wires from the Electrified Strike:
Connect the Ground wire to GND port
Connect the Normally Open wire to RELAY_NO port
**** The 12V Output must be enabled on devices web interface ****
Log in to the web interface of the device’s IP address from a web browser.
Note: To find the IP address of your device, your computer must be connected to the same network.
It is recommended that you use the Akuvox IP Scanner tool.
(www.knowledge.akuvox.com/docs/akuvox-ip-scanner)
To Enable the 12-Volt Output:
Navigate to the Access Control tab.
Select Relay.
Enable the Relay from the drop-down menu on the right.
Related Articles
Akuvox General || A092/A094 12-Volt Output Wiring
A092 / A094 12-Volt Output Wiring For use when installing an Access Control System without utilizing an External Power Supply to provide 12 Volts to devices Using a single Jumper wire; Connect the 12V_OUT to the RELAY_COM port. For Strike Wiring: ...Akuvox General || Utilizing 12V Output on R27
Using a small piece of wire as a jumper, connect the 12V OUT port to COM1 port Maglock: Connect Ground wire to GND_OUT port Connect Normally Closed wire to NC1 port **** The 12V Output must be enabled on devices web interface **** Log in to the web ...Akuvox Local || How to wire in electronic door locks utilizing the A02S built in 12 volt output (600ma)
1. How to wire in electronic door locks utilizing the A02S built in 12 volt output (600ma). (Rest at Lock) Door strike wires will go into "GND" and "NO". Magnetic Locks will connect to "GND" and "NC" 2. Log into the A02S WebUI and navigate to "Access ...Akuvox General || Akuvox pre-requisite and requirements
1. An Akuvox Installer Account Web Portal Login (If planning to use cloud services to setup and manage) a. Installer accounts are created for all new Akuvox customers. This account is used to create, setup and manage each project/ property, Akuvox ...Akuvox General || How to install Akuvox SR01 to control Electronic Locks || Install
How to install Akuvox SR01 to control Electronic Locks SR01 is a small accessory that improves the security of doors controlled by Akuvox’s door phones. It ensures that the door remains securely locked, even if the door phone is dismounted or ...