Akuvox General || Control4 - SIP and HTTP Unlock Settings for use with Akuvox

Akuvox General || Control4 - SIP and HTTP Unlock Settings for use with Akuvox

Control4 - SIP and HTTP Unlock Settings for use with Akuvox.

Go to the System Design interface to select the door phone first.

Go to Properties interface to configure SIP account, SIP password, enable the Relay via HTTP option and configure its username and password. Every row needs to be confirmed by clicking on the Set button.

Back to the door phone’s website, and go to Status - Basic - Account Information interface to check whether the SIP account is registered or not.

Note: If the SIP account is not registered, users can

1. Check whether the Communication agents is added or not;

2. If added, reboot the controller to try to active the SIP server again.

Figure 2.6 SIP and HTTP unlock settings

 

NOTE:

Limitation in Akuvox Drivers

1. Supported features from Composer:

SIP settings, unlock via HTTP command settings, video preview settings, Call group (The default All call group is only with Control4 devices, like T3), Ringer, Speaker, Mic sliders (The call volume cannot be muted from composer), Custom Buttons, Alternate Camera

2. Unsupported features from Composer:

Play Door Chime, Do Not Disturb, Auto Answer, Send Video, Stop Video, Pause/Resume Call, Monitor Mode, Current Session, API Calls, set show main/mirror video

    • Related Articles

    • Akuvox General || Control4 - Akuvox Lock Control

      Control4 - Akuvox Lock Control Go to Items - My Drivers interface to find the door lock driver. Double click to add drivers to the project and rename them. Go to Connections - Control/AV interface and select door lock. Go to Control & Audio Video ...

    • Akuvox General || Control4 - Akuvox Communication Settings

      Control4 - Akuvox Communication Settings 1. Call group Go to Agents interface and add Communication agent first. The default All call group is only with Control4 devices, like T3. Users can add new call group, like Call_to_C313_and_T3, and add C313 ...

    • Akuvox General || HTTP Unlock command does not work from other devices but works fine using a web browser

      Fix: Make sure "SessionCheck" is "DISABLED" on the receiving http relay on the akuvox unit controlling the door locks. How to Configure open relay via HTTP for door unlock You can unlock the door remotely without approaching the device physically for ...

    • Akuvox General || Using NFC Unlock

      Akuvox General || Using NFC Unlock The NFC feature requires the SmartPlus App. The Door Phone should be deployed on the Akuvox uCloud. To open doors via NFC, the feature must be enabled on the Door Phone, SmartPlus App, and the Users’ Mobile Phone ...

    • Akuvox Local || SDMC: SIP Settings

      SDMC: SIP Settings You are required to configure SIP settings for the SDMC before you can make SIP calls from SMDC to the devices. Click System > SIP Settings. Configure the SDMC SIP settings. Field Name Description Field Name Sub-field Name ...