Akuvox Local || How to Log in and Configure SDMC

Akuvox Local || How to Log in and Configure SDMC

How to Log in and Configure SDMC

To log into SDMC for the first time, you are required to enter the username and password. Both are admin by default. You can click on the upper right corner of the screen to close SDMC.

Getting Started

Network Connection

You need to select a specific Network Interface Card (NIC) used to connect SDMC and devices for the data transmission. And the SDMC IP address will appear automatically after you select your NIC.

1. Click to select NIC.

2. You can also click ，select System Setting > Network to set and edit the network connection after login.

Language

SDMC currently supports English and Chinese languages (both simplified and traditional Chinese).

  1. Click System > System Setting > Language.

  2. Click OK for the Confirmation.

Password

After you log into the SDMC, you can change the SDMC login password if needed.

    • Related Articles

    • Akuvox Local || SDMC: Local SDMC Program Backup & Restore

      SDMC: Local SDMC Program Backup & Restore SDMC allows data to be stored in your computer automatically, which can be used to restore your SDMC database when data damage or breakdown occurs. You can set the auto-backup schedule for the database. Click ...

    • Akuvox Local || SDMC: SIP Settings

      SDMC: SIP Settings You are required to configure SIP settings for the SDMC before you can make SIP calls from SMDC to the devices. Click System > SIP Settings. Configure the SDMC SIP settings. Field Name Description Field Name Sub-field Name ...

    • Akuvox Local || Voice Assistant

      Akuvox General || Voice Assistant -------------------------------------------- Albert is a Voice Assistant from Akuvox. The Voice Assistant may be configured for intercom calls, door opening, arming modes, and other functions. Voice Command: "Albert" ...

    • Akuvox Local || How to Configure SMTP server for use in SDMC

      How to Configure SMTP server for use in SDMC SMTP server can be configured in your SDMC. When the alarm goes off or the door is opened, then notification can be sent to the SMTP server. Click System > System Settings > SMTP. Configure the parameters. ...

    • Akuvox Local || RTSP configuration

      All Akuvox Doorphones that have cameras support RTSP. Akuvox RTSP string - rtsp://X.X.X.X/live/ch00_0 Setting up RTSP on Android based doorphones Step 1: Log into the device using the local IP. Default is admin / admin. Step 2: Navigate to Intercom ...