Akuvox Local || How to Register 3rd party SIP Account on Akuvox Door Phones
How to Register 3rd party SIP Account on Akuvox Door Phones
NOTE: SIP-based Akuvox intercom devices can integrate many third-party SIP server brands. Usually, we register a SIP server to implement SIP calls among multiple devices in different networks.
Note: If you want to register SIP accounts of third-party devices, obtain the following information from third-party service providers.
-
Server IP
-
Port
-
Register Name
-
User Name
-
Password
-
We take the door phone R29 and indoor monitor IT88 for example.
Step 1
Enter the device IP in a browser and log into the web interface with the username and password. The default is admin/admin.
Step 2
Go to Account > Basic interface. It appears UnRegistered in the Status box when the SIP account is not registered.
Step 3
Enter the Server’s IP address or its URL shown in PBX.
Note
-
PBX feature is only applicable to C317, C319, IT88, IT83, X933 and S567.
-
Check Server IP and Port in Akuvox Indoor Monitors.
-
Navigate to
System Setting > More > PBX screen in C317 and IT83.
System Setting > Advance Settings > PBX screen in IT88, C319, X933, and S567. -
The default password to enter the Advance Settings is 123456.
You can set up Preferred SIP Server and Alternate SIP Server as a backup for the device to achieve call sessions through SIP servers between intercom devices.
Step 4
Select Account:
Account 1 and Account 2 can both be used for SIP account registration.-
Account 1 is usually used to access Akuvox Cloud.
-
Account 2 is recommended to register an SIP account.
-
Note
-
Select the registered account to dial, or it will fail to call.
-
Click Enable to activate the registered SIP account.
-
Configure the Display Label to be shown on the device screen.
-
Configure the Display Name to be shown on the device being called to.
-
Enter Register Name, User Name, and Password shown in PBX.
Note
-
To check Register Name, User Name, and Password in Akuvox indoor monitors, press the Edit icon.
-
Click Submit.
It appears Registered after registering successfully.
Related Articles
Akuvox Local || SDMC: SIP Settings
SDMC: SIP Settings You are required to configure SIP settings for the SDMC before you can make SIP calls from SMDC to the devices. Click System > SIP Settings. Configure the SDMC SIP settings. Field Name Description Field Name Sub-field Name ...Akuvox General || How to Setup Land Line Speed Dial on Door Phones
Configuring Akuvox X915, X916 model Door Phones to call a landline using the Receptionist speed dial on the home screen. For landline function, please log into your Akuvox Installer Cloud Account to enable this feature. **Prerequisite: Landline is a ...Akuvox Local || How to Configure Web Relay On Akuvox Door Phones
Scenario Web Relay is a network-based relay that is connected to the door lock for access control. As it is network-based, web relay gives you greater security for access control. This article teaches you how to configure web relay and web relay ...Akuvox General || Door Phone won't call monitor on a closed local network
Akuvox door phones wont call indoor monitors on closed local network. Sip hacking needs to be disabled to receive calls from Door Phones. 1. Log into Indoor Monitor Web UI through ip address. 2. Navigate to Account> Advanced > Prevent SIP Hacking > ...Akuvox Cloud || How to configure Web Relay to operate door phones from Indoor Monitors
Tips: IT83X,C317 has NO/NC/COM three terminals which supports to connect locks by itself. Users can press the Unlock key during the call. . 1. Local Relay Go to Phone - Relay to setup the DTMF code of local relay in website. Relay Type: There are two ...