Akuvox Local || How to Upgrade Device Firmware in SDMC

Akuvox Local || How to Upgrade Device Firmware in SDMC

How to Upgrade Device Firmware in SDMC

SDMC allows you to upgrade device firmwares remotely.

1. Click Device Management > Upgrade Management > .

2. Select the device model on the upper left corner and tick the box of the desired device.

3. Select Upgrade Right Now or customize the time by clicking Idle-time Upgrade.

4. Click Select File to upload the firmware and click Upgrade.

You can select the device model or status type (All Status, Finished, Processing, and Cancel) to check the device upgrading details.

    • Related Articles

    • Akuvox Local || SDMC Device Management

      SDMC Device Management The Device Management module allows you to manage device deployment on a node-by-node basis and synchronize data to the corresponding devices at selected nodes. It also enables you to make calls to specific devices and open ...

    • Akuvox Local || SDMC: SIP Settings

      SDMC: SIP Settings You are required to configure SIP settings for the SDMC before you can make SIP calls from SMDC to the devices. Click System > SIP Settings. Configure the SDMC SIP settings. Field Name Description Field Name Sub-field Name ...

    • Akuvox Local || SDMC: Local SDMC Program Backup & Restore

      SDMC: Local SDMC Program Backup & Restore SDMC allows data to be stored in your computer automatically, which can be used to restore your SDMC database when data damage or breakdown occurs. You can set the auto-backup schedule for the database. Click ...

    • Akuvox Local || Voice Assistant

      Akuvox General || Voice Assistant -------------------------------------------- Albert is a Voice Assistant from Akuvox. The Voice Assistant may be configured for intercom calls, door opening, arming modes, and other functions. Voice Command: "Albert" ...

    • Akuvox Local || SDMC: Add Devices via Scanning

      SDMC: Add Devices via Scanning SDMC allows you to scan the devices in the same network before adding them to the specific node. Device network information will be automatically filled in. 1. In the Device Management module, click . Select to display ...