Akuvox Local || SDMC: How to Add Elevator Lift Control

Akuvox Local || SDMC: How to Add Elevator Lift Control

SDMC: How to Add Elevator Lift Control

  1. Click System > Lift Settings.

  2. Click of the lift you want to control.

3. Enable the lift and edit the lift label.

4. Enter the HTTP command provided by the lift control manufacturer.

Click to summon the lift.

  • Field Name Description:

NO.

Field Name

Descriptions

1

Label

Configure the lift label 1-6. The label should be 63 digits maximum in length.

2

HTTP command

The HTTP command should be 255 digits maximum in length.

Lift control can also be made on the dashboard by clicking System > Lift Settings.

    • Related Articles

    • Akuvox Local || EC33 WebUI Elevator Access Control and Fire Alarm

      WebUI Elevator Access Control and Fire Alarm You can conduct elevator access control on the web interface. You can click a specific floor number (the relay-based number) to allow access to the specific floor, click Open All to allow all floor access ...

    • Akuvox Local || How to Add Residents in SDMC

      How to Add Residents in SDMC Personnel Management module includes three sub-modules, Resident, Property Worker, and Verification Mode where you can manage residents, property staff, various types of authentication, and access control. Manage ...

    • Akuvox Local || SDMC: Add Devices via Scanning

      SDMC: Add Devices via Scanning SDMC allows you to scan the devices in the same network before adding them to the specific node. Device network information will be automatically filled in. 1. In the Device Management module, click . Select to display ...

    • Akuvox Local || SDMC: How to Add Monitoring Devices

      SDMC: How to Add Monitoring Devices Setting Add Monitoring Devices You can add Akuvox door phones as monitoring devices in the same LAN network via scanning and you can also add third-party IP cameras for monitoring. Add Akuvox Door Phone via ...

    • Akuvox Local || How to Add Devices on SDMC

      How to Add Devices on SDMC After the nodes are created, you can start adding the device(s) to the specific level of nodes in the Device Management module. Devices can be added separately, in batch, or via scanning. Add Devices Separately In the ...