Akuvox Local || SDMC: How to Add Monitoring Devices

Akuvox Local || SDMC: How to Add Monitoring Devices

SDMC: How to Add Monitoring Devices

Setting

Add Monitoring Devices

You can add Akuvox door phones as monitoring devices in the same LAN network via scanning and you can also add third-party IP cameras for monitoring.

  • Add Akuvox Door Phone via Scanning

  1. Click and click .

  2. Tick the checkbox of the desired door phone and click .

3.Enter the RTSP username and password for authentication, and select the number of the channel display.

4.Enter the relay username and password for authentication,and enable relay(s) as needed.

  • Field Name Description:

NO.

Field Name

Descriptions

1

Device Number

Shows the monitoring device IP address.

2

Device Name

Shows the monitoring device name by location.

3

MAC Address

Shows the monitoring device MAC address.

4

Display

Select the number of channels if you want to view the monitoring video (from 1-16 channels).

5

RTSP User

Enter the door phone RTSP username for authentication.

6

RTSP Password

Enter the door phone RTSP password for authentication.

7

Username

Enter the door phone relay username for authentication.

8

Password

Enter the door phone password for authentication.

9

Relay A/B/C/D

Enable the relay(s) that can be triggered while you are monitoring.

Note:

The number of channels selected should be matched with the channel display icon you selected. For example, if you select “5” for the channel display, and you select , then the video will not be displayed. You should select the channel icon greater than 5.

    • Related Articles

    • Akuvox Local || SDMC: Add Devices via Scanning

      SDMC: Add Devices via Scanning SDMC allows you to scan the devices in the same network before adding them to the specific node. Device network information will be automatically filled in. 1. In the Device Management module, click . Select to display ...

    • Akuvox Local || How to Add Devices on SDMC

      How to Add Devices on SDMC After the nodes are created, you can start adding the device(s) to the specific level of nodes in the Device Management module. Devices can be added separately, in batch, or via scanning. Add Devices Separately In the ...

    • Akuvox Local || Add Devices in Batch on SDMC

      Add Devices in Batch on SDMC SDMC allows you to add devices in batch using .xlsx file. You can export existing device information and use the file as a template. 1. In the Device Management module, click . 2. Click Export to export the template file. ...

    • Akuvox Local || SDMC: Update Autop Data to Devices

      SDMC: Update Autop Data to Devices Click System > Device Backup & Restore. Select the device by node on the left column or search the device by Device Name, MAC, etc. Click to update the Autop data of the desired device.

    • Akuvox Local || SDMC Device Management

      SDMC Device Management The Device Management module allows you to manage device deployment on a node-by-node basis and synchronize data to the corresponding devices at selected nodes. It also enables you to make calls to specific devices and open ...