SDMC: How to Create and Add Face ID

Create Face ID

1. Navigate to Personnel Management > Verification Mode > Face ID (on the left column) > .

2. Select Personnel Type.

• Select Resident type

1. Enter the resident’s name or you can click to select the resident from the existing residents name list, and fill in other information.

2. Select the room node for the resident on the left column.(The resident will be able to access the building in which the room is located.)

3. Upload the resident’s picture to SDMC.

• Select Property Worker type

1. Enter the property staff’s name or you can click to select the staff from the existing property staff name list, and fill in other information.

2. Select the specific nodes (locations) where you allow the property staff to access.

3. Upload the property staff ’s picture to SDMC