Applies to: Titanium NVRs with dual-lens thermal cameras (confirm models)
I added a third-party thermal camera to the NVR, but the thermal imaging channel isn’t displayed. Why?
The NVR displays the thermal channel only when a dual-lens thermal camera is added using the Titanium private protocol. If the camera is added through any other protocol, including ONVIF, the thermal image is not displayed.
| Protocol used to add the camera | Thermal channel displayed |
|---|---|
| Titanium private protocol | Yes |
| ONVIF or other protocols | No |
Use a Titanium thermal camera and add it to the NVR with the Titanium private protocol.