Titanium General || How to Reset the NVMS Admin Password ||

Titanium General || How to Reset the NVMS Admin Password ||

How to Reset the NVMS Admin Password

Applies to: Titanium NVMS (confirm versions)

Question

How do I recover or reset the NVMS admin password if it has been forgotten?

Answer

Use the Forgot password option on the NVMS login screen. There are two recovery methods: security questions or a dynamic password from Technical Support. Either one opens the password reset page.

Steps

Option 1: Security questions

  1. On the NVMS login screen, click Forgot password.
  2. Select the security questions method.
  3. Enter the correct answers to the security questions.
  4. On the password reset page, set a new admin password.



If security questions haven’t been set up yet: After a successful login, NVMS shows a pop-up prompting you to set them up. Set them up in advance so this method is available if the password is forgotten.

Option 2: Dynamic password from Technical Support

  1. On the NVMS login screen, click Forgot password.
  2. Select the dynamic password method. NVMS displays the CPU ID, MAC address, and time of retrieval.

  3. Keep this page open. The information is generated dynamically, and closing the page or regenerating it invalidates the information.
  4. Send the CPU ID, MAC address, and retrieval time to Technical Support.
  5. Technical Support provides a dynamic password.
  6. Enter the dynamic password to open the password reset page.
  7. Set a new admin password.


Verification

Log in to NVMS with the new admin password.