Titanium IPC || How to Add a Solar Camera to an NVR

Titanium IPC || How to Add a Solar Camera to an NVR

How to Add a Solar Camera to an NVR

Applies to: Titanium solar cameras IP-5IR4SP6-28-KIT. Auto report requires NVR firmware 1.4.11.

Question

What methods can be used to add a solar camera to an NVR?

Answer

Solar cameras can be added to an NVR in two ways:

MethodNotes
IP address / Domain name                     Add the camera manually from the NVR’s add camera interface.
Auto report                     The camera reports itself to the NVR. Requires NVR firmware 1.4.11.



Steps

Option 1: Add by IP address or domain name

  1. On the NVR, open the camera add interface.
  2. Choose to add the camera by IP address or domain name.
  3. Enter the camera’s IP address or domain name, port, username, and password.
  4. Save, and confirm the camera shows online.

Option 2: Add by auto report

  1. On the solar camera’s web interface, open the auto report settings and enter the NVR’s information (IP address, port).
  2. Save the settings.
  3. On the NVR (firmware 1.4.11 or later), confirm the camera appears and is added.

Verification

The solar camera shows as online on the NVR and its live view displays.