Diamond IPC || How to Initialize IPC Without using ConfigTool (WEB 5.0) ||

How to Initialize IPC Without using ConfigTool (WEB 5.0)

This knowledge base article provides detailed instructions on initializing an IPC using the WEB 5.0 firmware. Initialization is the process of setting up the device for the first time, ensuring it is properly configured and ready for use.
 

Initializing your device is essential to ensure it operates correctly and is configured according to your preferences. This process involves setting up the network connection, regional settings, time zone, and user credentials. Proper initialization ensures the device is secure, accessible, and tailored to your specific needs, enhancing its overall functionality and performance.

Steps to Initialize

Product Model and Firmware Version
This tutorial is based on WEB 5.0 firmware, though interfaces may vary across models and firmware versions.

Operation Description

Connect the power supply to the device.

Connect your PC to the camera using a network cable.

Open a web browser and enter the camera's IP address (default: 192.168.1.108) in the address bar.

Select the appropriate region and language.

Set the video standard to either NTSC or PAL. 

• Choosing between NTSC and PAL depends largely on the geographical region and the specific requirements of your video system. NTSC is more suited for regions like North America and Japan, while PAL is preferred in Europe, Africa, and parts of Asia and South America.

Read the Disclaimer. If you agree, select the checkbox and click ‘Next’.

To synchronize the time zone with your PC, select the ‘sync with pc’ function.

Enter the username and create a password (default username: admin).

 If you do not have an email address available, unselect the checkbox.

Enabling P2P will assist in remotely managing your device by collecting information such as IP address, MAC address, device name, and device SN. If you do not agree to enable the P2P function, unselect the checkbox.

Login to the device.

Click the Settings icon in the upper right corner and select Network Settings.

Select TCP/IP. Set the IP address by selecting Static or DHCP for an IP address to be assigned, gateway, and subnet mask of the camera. Click Apply when done. 

Additional Support

For further assistance or inquiries, please contact our tech support at:

Email: support@enssecurity.com
Phone: (888) 397-1999

• Related Articles

• Diamond IPC || How to locate device on LAN via ConfigTool

  1. Locate ConfigTool on your computer. If not installed, please visit www.enssecurity.com to download. 2. Once installed, open the Configtool. The configtool should automatically find Diamond devices on the same network. 3. To change the network of ...

• Diamond IPC || How to Set Illuminator Function for cameras without Acupick (WEB 5.0) ||

  How to Set Illuminator Function (WEB 5.0) This knowledge base article provides detailed instructions on setting up the Illuminator function for devices using the WEB 5.0 firmware. The Illuminator function enhances visibility in low-light environments ...

• Diamond IPC || Configure Multicast on a IPC || (Web 5.0)

  How to Configure Multicast on IPC (Web 5.0) This article provides a step-by-step guide for configuring multicast on your IPC (Internet Protocol Camera) using the Web 5.0 firmware. The instructions may vary slightly depending on the model and firmware ...

• Diamond IPC || How to Set P2P Function (WEB 5.0) ||

  This article provides a step-by-step guide for configuring the P2P (peer-to-peer) function on devices using the WEB 5.0 firmware. The instructions may vary slightly depending on the model and firmware version of your device. What is P2P? P2P ...

• Diamond IPC || How to Perform Firmware Update (WEB 5.0) ||

  How to Perform Firmware Updates (WEB 5.0) This article provides a step-by-step guide for performing firmware updates on devices using the WEB 5.0 firmware. The instructions may vary slightly depending on the model and firmware version of your device. ...