How to Set Alarm Output (WEB 3.0)

This knowledge base article provides a detailed guide on setting up the alarm output for devices using the WEB 3.0 firmware. Proper configuration of alarm output ensures that alarms are effectively communicated, and actions are taken in response to specific events.

Purpose and Benefits

Setting up the alarm output is essential for enabling the device to respond appropriately to detected events. This includes triggering recordings or activating connected devices, thereby enhancing the overall security and functionality of the monitoring system.

Steps to Set Alarm Output

Operation Description

Step 1: Login to your device.


Step 2: Navigate to Setting > Event > Alarm > Enable.


Step 3: Enable Record and Relay-out, and then configure Record Delay and Alarm Delay. Save

• Record Delay: After an alarm is triggered, the system continues recording for an extended time period as set in the Record Delay.
• Alarm Delay: The alarm continues for an extended period as set in the Alarm Delay after the initial trigger ends.

Additional Support

For further assistance or inquiries, please contact our tech support at:

Email: support@enssecurity.com
Phone: (888) 397-1999