Diamond IPC || PTZ Auto Tracking Configuration (new GUI)

Diamond IPC || PTZ Auto Tracking Configuration (new GUI)

Diamond Auto Tracking PTZ (Updated GUI)

From the main view of the PTZ, select the home button
 

Then select PTZ

 

Under preset, add a preset, and move the camera for the first preset using the PTZ controls. We

will use this preset as the Home position. Select apply when you are ready to save the preset.

 

Select Home menu button and move to AI section

 

Under

AI

  1. Select Smart Plan

  2. Select Preset

  3. Enable IVS then select Next

 

 

Select IVS

  1. Add rule

  2. Select IVS rule, For this example, we selected “Intrusion”.

 

 

Rule will be “on” after selecting the IVS rule.

  1. Action: Auto Tracking will activate when

    1. Object appears in selected field

    2. Crosses selected field

  2. Enable Auto Tracking

 

On the Live Preview, you can draw the rules

 

Select Apply to save the changes and for the rule to take effect.

    • Related Articles

    • Diamond IPC || Setting Up Auto Tracking PTZ New Interface || Web GUI

      Diamond IPC || Setting Up Auto Tracking PTZ New Interface || Web GUI Begin by accessing the Web GUI of the PTZ camera and select the setting icon in the upper right of the web page. Select PTZ and adjust where you would like to set the home position ...

    • Diamond IPC || Setting Up Auto Tracking PTZ || Web GUI

      NOTE: You can have multiple presets with auto tracking, but there is a delay of about 1 second when the camera swaps between them. This is affected by the complexity of the scene and how many auto tracking presets you have enabled. 1. Log into your ...

    • Titanium IPC || Enabling PTZ Auto Tracking

      Enabling Titanium PTZ Auto Tracking Logging into the camera directly Select Config on web page On the left hand side choose an “Event” For this example we chose “Line Crossing” Enable the event Enable “Trigger Track” Save settings In the next section ...

    • UNV IPC || PTZ Auto Tracking

      Log into the PTZ. Click on Setup Navigate to Intelligent- -> Smart --> Auto Tracking., then click on the Gear icon Enable Alarm Sound and Alarm Lights if needed under "Trigger Actions"

    • Diamond IPC || Set up PTZ auto tracking while on tour mode

      Log into the PTZ camera through the web GUI. Select Setting. Select PTZ and then select Function. Use the PTZ controls to position the camera at the starting point. Depending on how large of a distance that needs to be covered, several presets will ...