Diamond Mobile App || Adding Device to DMSS Mobile App (Web GUI)

• Related Articles

• Diamond IPC || How to Set P2P Function (WEB 5.0) ||

  This article provides a step-by-step guide for configuring the P2P (peer-to-peer) function on devices using the WEB 5.0 firmware. The instructions may vary slightly depending on the model and firmware version of your device. What is P2P? P2P ...

• Diamond Mobile App || Adding Devices to Mobile Application (DMSS) || Web GUI

  ***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...

• Diamond Mobile App || DMSS Cloud Account Device Sharing

  DMSS Cloud Account Device Sharing (This demonstration was done on an iPhone 12 with Software version 16.3.1) Before we begin, please make sure that the device we’re going to use was added to DMSS using the “ACCOUNT” option and not the “LOCAL” option. ...

• Diamond Recorder || DMSS Diamond Mobile Notifications || Local GUI

  ***Note: You will need to download the DMSS app (gDMSS for Android and iDMSS for iPhone) from the phone’s respective app store.*** Please make sure the recorder is well connected to the Internet. And the status of the “P2P” shows Online and the DMSS ...

• Titanium Mobile App || Adding Device to Mobile Application (Super Live Plus) || WEB GUI

  To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...