Log into the system by entering the username and password.

After logging in, right click on the screen and select “Menu”

After selecting Main Menu, select “Network” underneath the icons as is in the following picture.

On the Network page, make sure to enable DHCP for the IP address (it will turn the switch blue). It is recommended to leave the preferred and alternate DNS addresses as 8.8.8.8 and 8.8.4.4 unless a network engineer advises differently. After confirming all settings, select “P2P” on the lower left hand corner of the screen.

On the P2P page, make sure that there is a check mark in the box next to Enable. After enabling P2P, the system may be viewed remotely via phone apps (iDMSS Plus, gDMSS Plus) or CMS software (SmartPSS). The QR code may be scanned via phone apps, but for SmartPSS, the QR code will need to be entered manually. That QR code can be found underneath the right hand QR code.