Diamond Mobile App || Adding Devices to Mobile Application (DMSS) || Web GUI
***Note: You must use Internet Explorer to view the system via web interface***
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser.
Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the port number after the ip address by inserting a colon “:” in between the address and port number).
Install all requested web plugins that are prompted by Internet Explorer. Once installed, you may need to refresh, or restart the web browser. You may install the plugin by selecting “Run”.
After logging into the system, select the Management button on the top left hand corner of the screen.
In the Management menu, select Network.
On the first Network page (TCP/IP), enable DHCP and DNS DHCP. This will force the system to obtain an address automatically from the router. In some rare cases, there may need to be manual configurations for the network IP address. Please refer to the network administrator if so. After marking those options, select P2P.
On the P2P menu, make sure to mark the check box next to enable. With the QR code, you can either use a phone app such as IDMSS (iphone) or GDMSS (android), as well as SmartPSS (PC) to view the cameras remotely without port forwarding the recorder.
Related Articles
Diamond IPC || How to Set P2P Function (WEB 5.0) ||
This article provides a step-by-step guide for configuring the P2P (peer-to-peer) function on devices using the WEB 5.0 firmware. The instructions may vary slightly depending on the model and firmware version of your device. What is P2P? P2P ...Diamond Mobile App || Adding Device to DMSS Mobile App (Web GUI)
Diamond Mobile App || Adding Device to Mobile App (DMSS) Webgui On the web portal enter into: Settings > Network > P2P Scan the QR code that has the serial number on the right. On the app: Click on (+) sign > “scan QR code” > next > choose correct ...Diamond Mobile App || Adding Devices to Mobile Application (DMSS) || Local GUI
Log into the system by entering the username and password. After logging in, right click on the screen and select “Menu” After selecting Main Menu, select “Network” underneath the icons as is in the following picture. On the Network page, make sure ...Titanium Mobile App || Adding Device to Mobile Application (Super Live Plus) || WEB GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...Diamond Recorder || DMSS Diamond Mobile Notifications || Local GUI
***Note: You will need to download the DMSS app (gDMSS for Android and iDMSS for iPhone) from the phone’s respective app store.*** Please make sure the recorder is well connected to the Internet. And the status of the “P2P” shows Online and the DMSS ...