Diamond Mobile App || Transfer device data from iDMSS / gDMSS Plus to DMSS app

Diamond Mobile App || Transfer device data from iDMSS / gDMSS Plus to DMSS app

First, we need to load up the old iDMSS Plus or gDMSS Plus application.

Go to Home and select Device.

Click the Blue button on lower right (Create contact card - see first image below)

Select up to 10 devices at once (Each Device Card can store a maximum of 10 devices total, so you may need to create multiple cards/ QR Icons). Once finished, tap the Create Device Card button. 

IMG_0671.PNG     IMG_0673.PNG

It will prompt you to create a password for this card (Confirm to enter device password when importing device?) Choose Yes, and create a password for this device list. 

IMG_0677 copy.png

Once the QR Code has been generated, click the Save icon in the Upper Right Corner to save to your Photo Album

 

Now, we need to open the DMSS application.

Choose the "+" sign in the upper right corner to Add, then select SN/Scan.

Now instead of scanning anything, tap the picture icon in the upper right corner of the Add Device page.

IMG_0675.PNGIMG_0676 copy.png

Select the QR code image generated earlier from your Photo Album. Then tap the Save icon in the upper right corner.

You will be prompted to key in the Device Card password you generated earlier. Once keyed in, all devices from the Device Card should should now load in the DMSS Home page Device list.

You may need to repeat this process if you have more than 10 devices stored on (g/i)DMSS Plus.

 

    • Related Articles

    • Diamond Mobile App || Adding Device to DMSS Mobile App (Web GUI)

      Diamond Mobile App || Adding Device to Mobile App (DMSS) Webgui On the web portal enter into: Settings > Network > P2P Scan the QR code that has the serial number on the right. On the app: Click on (+) sign > “scan QR code” > next > choose correct ...

    • Diamond Mobile App || DMSS Push Notification Setup

      DMSS Push Notification Setup (This demonstration was done on an iPhone 12 with Software version 15.6) 1) To enable notifications, first go into the iPhone’s Settings App 2) After opening the Settings button then scroll down to the app list (it will ...

    • Diamond Mobile APP || Unbind device from DMSS Account

      How to unbind a Diamond series device with DMSS. There are two parts to this guide. Part 1. Take a picture of the sticker that is physically on the device. Part 2. Open the DMSS app and make sure you are signed into the account you wish to take over ...

    • Diamond Mobile APP || Remove Device

      1. Launch DMSS Mobile App 2. Tap on Home and then select one of your added device that you wish to share. Tap on ... icon 3. Tap on Device Details 4. On the very bottom, you will see button to remove your device, tap on Delete.

    • Diamond Mobile App || Playback and Backup for DMSS app

      Diamond Mobile App || Playback and Backup (DMSS) On the DMSS app homepage - click playback. Select the channel you want to view, change the date, record type, and time. You can also backup footage from your phone by clicking the scissors > “play” ...