Emerald CMS + Software || Add device via IP
(This demonstration was done on MacOS 12.0 Monterey)
1) First Open ENS Station and go into Device Management.
2) There are two ways of adding a system with the IP Address. We’ll first demonstrate how to add a device manually by looking under Device Management and clicking on the “+ Add” button.
3) A window will appear where we can fill in the required information. Device Name will be whatever desired name you want for the system to appear as in the ENS Station Software. The remaining information should be the IP, port, User (commonly admin) and Password belonging to the system.
4) This should be the appearance of the Device Manager after adding a device. If the device Status is offline, be sure to check that the password is correct by clicking on the Pencil Icon on the right side of the system.
5) The second way of adding a system using the IP is by clicking on the list of available devices. After going into Device Management, look below on the list of available devices. Check the box of the desired device and then click on the “+ Add” Button.
6) This will automatically add the system to your list of devices. If the device Status is offline, be sure to check that the password is correct by clicking on the Pencil Icon on the right side of the system.
Related Articles
Emerald CMS + Software || Add device with IP ||
ENS Station: Add Device via IP (This demonstration was done on MacOS 12.0 Monterey) 1) First Open ENS Station and go into Device Management. 2) There are two ways of adding a system with the IP Address. We’ll first demonstrate how to add a device ...Diamond CMS + Software || SmartPSS/Add Device via IP
1. Open SmartPSS, and click, "Devices" 2. To search the IP address of the device recorder Input the IP range of DVR/NVR to be added ➞ Select "Search". 3. Select the DVR/NVR to be added ➞ Select "Add". 4. Select "OK" 5. For Manual Add Select "Manual ...Emerald CMS + Software || Add P2P Device to ENS Station
ENS Station/Add Device P2P Once logged in to ENS Station click Device Management. On the device management page, click Cloud Device located on the left. At this point if you have already set up an account for the cloud device log in. If not, register ...Emerald Recorder || Add device via P2P || Web GUI
There will be 3 parts to this guide which include: Enabling P2P in the web GUI. Setting up ENS View and adding the device. Accessing your devices from the cloud with https://www.star4live.com/. Part 1: WEB GUI Login to the web interface of your ...Diamond CMS + Software || SmartPSS/Add Device P2P
1. Locate the serial number of your NVR or DVR. The serial number can be found at the following locations: On the underside or side of the unit In the web interface, under Info->Version On the system interface under Main Menu->Settings->Network->P2P ...