Emerald CMS + Software || How to add IP Camera from LAN to ENS Station

1. Open ENS Station and go to device management 

2. Identify the camera you would like to add from the online device area 

3. After adding the device it should look like this

4. To locate the camera, under operations click on the gear symbol (configuration) and the image of that specific camera should come up 

• Related Articles

• Emerald CMS + Software || Add device with IP ||

  ENS Station: Add Device via IP (This demonstration was done on MacOS 12.0 Monterey) 1) First Open ENS Station and go into Device Management. 2) There are two ways of adding a system with the IP Address. We’ll first demonstrate how to add a device ...

• Emerald CMS + Software || Add device via IP

  (This demonstration was done on MacOS 12.0 Monterey) 1) First Open ENS Station and go into Device Management. 2) There are two ways of adding a system with the IP Address. We’ll first demonstrate how to add a device manually by looking under Device ...

• Emerald IPC || How to locate IP Camera on LAN via ENS Station

  Open ENS Station and navigate to device management Here you can see the IP cameras by IP address. You can locate your specific camera by ip address, model number or Serial number. The cameras you see already are on the network so you can quickly add ...

• Emerald CMS + Software || Add P2P Device to ENS Station

  ENS Station/Add Device P2P Once logged in to ENS Station click Device Management. On the device management page, click Cloud Device located on the left. At this point if you have already set up an account for the cloud device log in. If not, register ...

• UNV CMS + Software || How to locate IP Camera on LAN via EZ Station

  How to locate IP Camera on LAN via EZ Station First you will need to connect your camera to your LAN so it can be discoverable Once you have done that you will need to open up EZ STATION and it should take you to the main control panel page. From ...