Emerald IPC || How to Configure Image Settings of IP Camera

Emerald IPC || How to Configure Image Settings of IP Camera

After logging in, under setup on the left hand side, there should be a video tab, and go to video once more to access video settings. In the next few screenshots you will see the different settings

1.1. Here are the image enhancement settings, if the image isn't coming out to your liking,  adjusting these filters will help

 

1.2. Here are the exposure settings

 

1.3. Smart illumination 

1.4 White balance 

1.5 advanced settings

 Alternatively, right after logging in, on the top right there's a box with the word image on it, you can click it and it'll navigate you straight to the picture above 

 

  1. Here we have the OSD (On Screen Display)  settings, here you can add a number of different types of information that would be relevant to any job specifications. 

  1. Here we have a privacy mask setting. This function allows you to censor a certain area of a camera image. Could be useful to provide security where cameras are in sensitive areas. 

 

    • Related Articles

    • Diamond IPC || Image Configuration Settings for the New Camera Web GUI

      AI SSA (Scene Self Adaption)- based on deep learning algorithm that can intelligently identify multiple scenes and adjust to their optimal images. If mode is turned on, you won't be able to make adjustments in Exposure, Backlight, Defog, and AFSA. ...

    • Emerald IPC || How to view snapshots from IP Camera

      Log into the web interface Under the photo option on the top of the page it will take you to where the snapshots are stored on the camera. In this screenshot the camera was set to take snapshots whenever motion is detected. Navigate to the proper ...

    • Diamond IPC || Configuring Video Settings of IP Camera

      Note: If your IP Camera is connected to the back of an NVR, these instructions will not apply. Download and install Config Tool.----> Config Tool Once installation is complete, open Config Tool Config Tool should display your IP Camera. Click the, ...

    • Emerald IPC || How to reset IP camera

      1. Log onto the remote web interface 2. Under the setup menu, on the left hand side go all the way down to the System tab 3. Under the system tab, go to the maintenance option and you will see config management, the default option factory defaults ...

    • Emerald IPC || How to configure IP Camera to record to SD-Card

      Log onto the web interface for the camera Under setup go to storage on the left-hand side of the page Storage medium should be the SD card you've placed into the camera and make sure to format it to be able to use it. Allocate capacity is used for ...