Emerald IPC || How to playback video from IP Camera that has SD-Card Installed
- Log into the camera from the web interface
- Go to the playback option and from there you will have access to the recordings right on the camera. On the right side you see a calendar, that is for you to filter out certain dates you would like to view
Recording is filtered by dates on the right hand side, you can scrub to certain time frames on the bottom. You can also download the video right on to your computer for archival purposes.
Here are the various options for playback. They are color coded for ease of viewing
RED- Select dates on which you want to playback
GREEN- from left to right the options are as follows, change view layout(single camera view to 16), clear all channels, and on the right is snapshot all cameras selected
BLUE- Here you can play, pause, reverse and fast forward
PEACH- Here you can control the scrub speed
PINK- Here you can scrub through the time of the current day selected
Related Articles
Diamond IPC || Playback Video / Backup Video from IP Camera's SD-Card || Web GUI
Download and install Config Tool Run the Config Tool The Config Tool should display your IP Camera. Click the icon to open Internet Explorer and access your IP Camera. Login with your username and password. Click on "Playback" On the right hand side ...Titanium IPC || SD Card Recording and Playback || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...Emerald IPC || How to configure IP Camera to record to SD-Card
Log onto the web interface for the camera Under setup go to storage on the left-hand side of the page Storage medium should be the SD card you've placed into the camera and make sure to format it to be able to use it. Allocate capacity is used for ...Diamond IPC || Configuring IP Camera to Record to SD-Card
Download and install ConfigTool Run the Config Tool The Config Tool should display your IP Camera. Click the, icon to open Internet Explorer and access your IP Camera. Login with your username and password. After logging in, Setting > Storage > ...Diamond IPC || How to configure IP Camera to record to SD Card
Access the camera’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the ...