Emerald IPC || How to Set Date and Time on an IP Camera

Emerald IPC || How to Set Date and Time on an IP Camera

1. After you have logged into the remote web interface for the camera, on the banner options go to setup on the left-hand side there should be date and time options available for configurations.



2. Expanding further you can see 2 options for time, TIME and DST (Daylight Savings Time) , you can sync with a NTP server (Network Time Protocol) or sync with the computer time.   

2.1.  Here you can see the settings for configuring the time with the NTP server (Time.windows.com)


2.2 Here you can see the settings for configuring time with the system (For offline systems)

2.3. DST options 


    • Related Articles

    • Diamond IPC || Configuring Date and Time on an IP Camera || Web GUI

      Note: If your camera is connected to the back of an NVR, you do not need to set the date and time on each camera. The NVR will do that automatically. If you don't have Config Tool yet, you can follow this link: Config Tool When you open Config Tool, ...

    • Emerald IPC || How to Set IP Camera to Static

      1. After logging in go under setup, go to network settings on the left hand side, then click on network once more 2. The option where it says obtain IP address you're going to want to click on that option and a drop-down menu appears, from there you ...

    • Diamond IPC || Set Up RTMP on a Diamond IP Camera (WEB 5.0)

      How to Set Up RTMP on an IP Camera (WEB 5.0) Real-Time Messaging Protocol (RTMP) in IP cameras is used for efficient live streaming of audio, video, and data over the internet. It provides low latency streaming for real-time viewing, ensures stable ...

    • Diamond Recorder || Sync IP Camera Time with Recorder || Local GUI

      Fix Security Camera Time Sync Issues Setting the Time and Adjusting the Time Sync Right-click with your mouse and go to Main Menu > System > General and then choose the Date & Time tab at he top. Make sure that the date and time, DST (if applicable ...

    • Diamond Recorder || Synchronize IP camera time settings with NVR || Web GUI

      Synchronize IP camera time settings with NVR Setting the Time and Adjusting the Time Sync Right-click with your mouse and go to Main Menu > System > General and then choose the Date & Time tab at he top. Make sure that the date and time, DST (if ...