Emerald IPC || How to Set IP Camera to Static
1. After logging in go under setup, go to network settings on the left hand side, then click on network once more
2. The option where it says obtain IP address you're going to want to click on that option and a drop-down menu appears, from there you can select Static
3. Once static is selected you can set an IP address manually and other related configurations
Related Articles
Titanium Recorder || Add Emerald IPC to Titanium NVR || WEB GUI
Emerald IPC cameras come with ONVIF enabled by default. 1- Identify the camera on the network using ENSTools, login and configure a static IP address. 2-Login on the 3rt party brand in this case is a Titanium NVR, add camera and use the manual ...Diamond IPC || Set IP Camera to Static || Web GUI
Note: If your IP Camera is connected to the back of an NVR, these instructions will not apply. Download and install ConfigTool The Config Tool should display your IP Camera. Click the, icon to open Internet Explorer and access your IP Camera. Login ...UNV IPC || How to Set IP Camera to Static
Download and install EzTools 2.0 You can do so using this link: https://drive.google.com/drive/folders/10aLpN_9r6WxAGqb_CAtSSmPRU6tbZxu1 Once installed click and open the app Once it’s opened, it will scan for devices on the network. You can click ...Emerald IPC || How to view snapshots from IP Camera
Log into the web interface Under the photo option on the top of the page it will take you to where the snapshots are stored on the camera. In this screenshot the camera was set to take snapshots whenever motion is detected. Navigate to the proper ...ENS IPC || External 3rd Party IP Camera Initialization || Local GUI
Log into the system. Once logged in, move the mouse to the top center area and click the “arrow-like” button for the main menu access. After selecting the menu, select the Camera tab. When selecting the Camera tab, you will be taken to the camera ...