2 indoor to 1 outdoor WITHOUT a PC

DEFAULT EVERYTHING (Unfortunately you do need ENS8000 to default outdoor stations)

1. Plug all 3 devices in

2. Pick up the first tablet
     a. (Page 1) Set password
     b. (Page 2) Click the slider for DHCP
     c. (Page 3) Set registration password to same as device password
     d. (Page 4) Turn on Guarding vision if desired
     e. (Page 5) This page should show the SID-MM1 module. If it does not, please check your cable.
        -. Select the gear icon and hit "ok" to activate
        -. Select the gear icon and set the SID-MM1 to DCHP
f. Test the call button on the SID-MM1

3. Pick up the second monitor
     a. Same as part 2(a)
     b. Same as part 2(b)
     c. Same as part 2(c)
        -. Scroll to the bottom in select "Indoor extension settings"
        -. Click "Link indoor stations"
        -. Select tablet one from the list. It should be the only thing on the list, if not then please check wiring.
     d. Same as part 2(d)
     e. (Page 5) Select the SID-MM1 from the list SOON AS YOU DO THIS, THE FIRST TABLET WILL REBOOT

4. Pick up the first indoor station
     a. Click the gear icon
     b. Click "Configuration" and enter password
     c. Click "Device Management"
         -. Click on the SIDD-MM1

5. Hit call button to test.