When setting cruise through DVR for this PTZ the patrol stops when manually controlling the PTZ. Camera loses its cruise function and stays at the last location the PTZ was moved to. To program the cruise feature it must be done directly through cameras OSD menu. By creating Preset 95 and calling the preset. And pressing Iris + on the PTZ controller as your selector.
***Note**** You can configure the PTZ presets from the DVR, but the PATROL(cruise) must be done from camera's OSD menu
Select Motion Parameters
Highlight Park ACT > PATROL 1 (this is what will allow the camera to resume its PATROL (cruise) after manually controlling PTZ
Enter Edit Patrols. Be sure Patrol NUM set to 1.
Set PST to match NUM to left so patrol is performed in preset order. To change PST highlight the NUM and move cursor to right. and change value by pressing DOWN. Move cursor to the left to highlight NUM and press down to change to next NUM set.Press Iris + to exit this menu back to main menu and EXIT to save.