ENS Coax || Fisheye (coax) SCCSF5M/11 configuring multi-view

ENS Coax || Fisheye (coax) SCCSF5M/11 configuring multi-view

 (same steps apply from NVR interface)

Bring up the camera in full screen. Select Iris + from PTZ controller.

 

image-1640890522854.png

Choose your multi view using PTZ arrow keys > select Iris + to confirmimage-1640890758536.png

 

image-1640890867896.png

image-1640890830829.png

 

When pressing Iris + to bring up OSD after selecting a different view type,

select RETURN to bring up the multiview configurations again to change to a different view type. 

image-1640891158478.png

image-1640891464495.png

 

 

 

    • Related Articles

    • Diamond IPC || How to Set Fisheye Dewarp (WEB 3.0) ||

      How to Set Fisheye Dewarp (WEB 3.0) This article provides a step-by-step guide for configuring the fisheye dewarp function on devices using the WEB 3.0 firmware. The instructions may vary slightly depending on the model and firmware version of your ...

    • Diamond IPC || How to Set Fisheye Dewarp (WEB 5.0) ||

      How to Set Fisheye Dewarp (WEB 5.0) This article provides a step-by-step guide for configuring the fisheye dewarp function on devices using the WEB 5.0 firmware. The instructions may vary slightly depending on the model and firmware version of your ...

    • ENS Recorder || Configuring Spot Out View (Legacy) || Local GUI

      Log into the system. Once logged in, move the mouse to the top center area and click the “arrow-like” button for the main menu access. After selecting the Menu, select the System tab. After selecting the System menu, on the General page, make sure ...

    • ENS Recorder || Configuring Spot Out View || Web Client

      To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...

    • ENS Mobile App || Dewarping Fisheye Camera on ENS Vision

      Fisheye de-warp on ENS vision (Version 1.3.0.1799513) When using the fish eye without adjusting the hardware on the camera itself. It's important to note that it is available only under certain conditions. Refer to the chart for details. When using ...