ENS Coax || OSD Menu switching on 5MP SCC models

ENS Coax || OSD Menu switching on 5MP SCC models

Product Department Notes:

"For all the SCC series 4in1 cameras, the output signal(TVI/CVI/AHD/960H) can only be switched by the dip switch when the current resolution is on default. 
8MP Coax default resolution is 8MP
5MP Coax default resolution is 4MP
2MP Coax default resolution is 2MP"

What this means is that when you have a 5MP SCC model, you must drop the camera to 4MP resolution. When you do this, the signal switch will function. When in 5MP mode, the signal switch button is not active.

    • Related Articles

    • ENS Coax || ESAP312-IR25X Programming Patrol (Cruise)

      When setting cruise through DVR for this PTZ the patrol stops when manually controlling the PTZ. Camera loses its cruise function and stays at the last location the PTZ was moved to. To program the cruise feature it must be done directly through ...

    • ENS General || Checking if a device has Audio over Coax capabilities

      Recorders: You may find out whether a recorder has Audio over Coax capabilities on the product page. Note: (B) Models support audio over coax while non (B) models do not. The (B) marker is only listed on the printed label on the unit and box. You ...

    • ENS Coax || Fisheye (coax) SCCSF5M/11 configuring multi-view

      (same steps apply from NVR interface) Bring up the camera in full screen. Select Iris + from PTZ controller. Choose your multi view using PTZ arrow keys > select Iris + to confirm When pressing Iris + to bring up OSD after selecting a different view ...

    • Titanium Recorder || ENS Analog HD Camera Audio Over COAX on Titanium DVR || WEB GUI

      This report is composed to show findings of an ENS Analog HD Camera, Specifically model SCC35T4M/28-H that shows camera's built-in MIC working over COAX with a Titanium DVR. Analog HD camera, Model SCC35T4M/28-H Needs to know if Built-in Mic will ...

    • ENS Access + Intercom || ENS Intercom

      This section will explain Intercom Setup after Physical Installation has been completed by installer. This Section will cover the following Models Outdoor Devices SID-MM1 - Main Outdoor Door Module. Doors/Gates that will be needing to be operated by ...