ENS General || Checking if a device has Audio over Coax capabilities
Recorders:
You may find out whether a recorder has Audio over Coax capabilities on the product page.
Note: (B) Models support audio over coax while non (B) models do not.
The (B) marker is only listed on the printed label on the unit and box. You will not be able to see whether a unit is a (B) model from the web GUI, SADPTool, etc. If the label is removed you will need to call technical support and provide the S/N from web. The Serial will be checked by our development team and will take approximately 24 hours for a response.
Coaxial Cameras:
You may find out whether a camera has Audio over Coax capabilities on the product page or specification sheet:
Related Articles
Titanium Recorder || ENS Analog HD Camera Audio Over COAX on Titanium DVR || WEB GUI
This report is composed to show findings of an ENS Analog HD Camera, Specifically model SCC35T4M/28-H that shows camera's built-in MIC working over COAX with a Titanium DVR. Analog HD camera, Model SCC35T4M/28-H Needs to know if Built-in Mic will ...ENS Mobile App || ENS Vision share device to other users
ENS Mobile App || Share Device to Other Users Before sharing the device to other users make sure they have created an account first, otherwise, the device will not be shared out. They must have created the account with an email address or a phone ...Emerald Mobile App || Share Emerald Cloud device via ENS View
How To Share a Device from Emerald account on ENS View (This demonstration was done on an iPhone 12 with Software version 16.1) 1) First Open the ENS View app and tap on the menu button on the top left corner 2) In the menu that appears, tap on ...Diamond Recorder || Coax Camera Missing Audio ||
Installation steps: 1. Set camera dip-switch to CVI. 2.. Enable audio recorder side: Camera > Encode > More Setting > Enable Audio + Set Source to HDCVI.ENS IPC || Enabling Audio and Two Way Talk || Web Client
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...