ENS IPC || Adding a Fisheye SIPSFCMS/13-EB with multiple panel views || Web GUI

ENS IPC || Adding a Fisheye SIPSFCMS/13-EB with multiple panel views || Web GUI

Adding a fish eye with multiple panel views. Web_GUI
SIPSFCMS/13-EB V5.7.190 build 220725


Ensure that you have two sections on the live view page (IE mode was enabled)

Two options software and hardware sections.Software solely for a temporary live view. In order to split the fish eye into multiple sections we need to make the change in the hardware section.

 

After selecting and confirming the display mode and the mounting type, the camera will reboot.

Once it reboots, checking under the hardware section for the camera list, it should populate with multiple camera channels.

 

 

 










 

 

 




Adding it to the recorder

Ensure that you add it using the “manual add” instead of the “quick add”.

 

It will give you multiple channels to add instead of adding just one.

Depending on the configuration of the Fish eye it will display multiple channels with the same ip address taking up multiple channels on the NVR. In this example, it displays four channels all the same ip address but different channel numbers.

    • Related Articles

    • Titanium IPC || Adding TVT Fisheye camera as different views using RTSP custom protocols || WEB GUI

      To add a single Fisheye camera as multiple views, each with their own visual angle, you must first create Custom Protocols for each intended view. Function Panel > Camera > Add Camera > Add Manually > Select Protocol to Custom > Change Status to ...

    • ENS IPC || Add IPC to 3rd party NVR || Web GUI

      Goal: Create ONVIF profile from IPC web interface. Steps: Configuration menu -> Network -> Advanced Settings -> Integration protocol (Set same password as IPC with "admin" authority.) Adding Camera to NVR as a ONVIF Protocol Make sure that when ...

    • Diamond IPC || How to Set Fisheye Dewarp (WEB 3.0) ||

      How to Set Fisheye Dewarp (WEB 3.0) This article provides a step-by-step guide for configuring the fisheye dewarp function on devices using the WEB 3.0 firmware. The instructions may vary slightly depending on the model and firmware version of your ...

    • Diamond IPC || How to Set Fisheye Dewarp (WEB 5.0) ||

      How to Set Fisheye Dewarp (WEB 5.0) This article provides a step-by-step guide for configuring the fisheye dewarp function on devices using the WEB 5.0 firmware. The instructions may vary slightly depending on the model and firmware version of your ...

    • ENS Recorder || Synology NAS setup || Web GUI

      Synology DS112J used in examples. NAS volume must not exceed 8TB Do not share one NAS volume with multiple devices, it will lead to connection/abnormal storage Adding DS112j via NFS Mount Type Log into the web page of the DS112j. The IP address of ...