ENS IPC || Adding Doorbell (ES-HD2) to ENS Vision

ENS IPC || Adding Doorbell (ES-HD2) to ENS Vision

ENS IPC || Adding Doorbell (ES-HD2) to ENS Vision

 

  1. Open ENS Vision and scan QR code


 

  1. Select Doorbell and [NDB322-W] then continue through setup wizard


 

  1. Setup doorbell with network onsite and let the doorbell connect


 

  1. Once adding is completed, enable the microphone and skip chime setup. You can configure the chime afterwards - it would be the same process as setting up another doorbell


 

  1. Doorbell should say “wifi enabled,” now able to view the doorbell camera
    .