ENS IPC || IP Camera Initialization || Local GUI
Log into the system.
Once logged in, you will automatically be taken to the Live View page. If you’d like to confirm, move the mouse to the top center area and click the “arrow-like” button for the main menu access.
After selecting the Menu, select Camera tab.
When in the camera setup page, click on the “Number of Unadded Online Device” on the bottom.
Then a list of online devices will show on the bottom of the page. Simply check the boxes on camera(s) that you want to activate before clicking on the “Activate” button.
Now, you’ll be taken to the Activation page, where you need to input the password for the camera you wish to activate. There are two options for the password: 1. By using the NVR default password or 2. Manually input the password as wanted. After that, you may click ok “OK” to finish the activation process.
Now, the camera will become activated and is ready to add to the camera list of NVR.
Related Articles
ENS IPC || External 3rd Party IP Camera Initialization || Local GUI
Log into the system. Once logged in, move the mouse to the top center area and click the “arrow-like” button for the main menu access. After selecting the menu, select the Camera tab. When selecting the Camera tab, you will be taken to the camera ...ENS IPC || IP Camera Initialization || Web Client
***Please Note: This process will ONLY work with ENS Series cameras*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the ...ENS IPC || External 3rd Party IP Camera Initialization || Web Client
***Open SADP Tool (Downloadable from www.enssecurity.com Support->Download->Tools)*** Use the SADP Tool to set up the IP addresses for each camera respectively. Depending on the setup, Each IP camera will have the same IP scheme as the NVR’s internet ...ENS IPC || IP Camera Reset via Button
ENS-H || IP Camera Reset Button Most ENS-H series IP cameras come with a hard reset button. 1. Disconnect the IP camera from the power source. 2. Press and hold the reset button down then power it back up. 3. Continue to hold the reset button down ...Titanium IPC || How to Set Up External IP Camera || Local GUI
***You will need a Windows based computer that is connected to the same physical network as the IP cameras to configure them with the necessary software*** Note: You will need to use the IP Tool (IPTool 2.0) to configure cameras that are on an ...