ENS IPC || IP Camera Initialization || Web Client
***Please Note: This process will ONLY work with ENS Series cameras***
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser.
Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the port number after the ip address by inserting a colon “:” in between the address and port number).
Install all requested web plugins that are prompted by Internet Explorer. Once installed, you may need to refresh, or restart the web browser. You may install the plugin by selecting “Run”. In some instances, you may need to close the web browser to complete the installation. After installation completes, please re-open Internet Explorer.
Depending on the firmware of the recorder, there may be an updated plugin available. If so, you will see the following prompt. Follow the previous instructions to update the plugin.
Once logged into the system, select the Configuration tab.
On the Configuration menu, select Camera Management.
In the Camera Management menu, select the IP Camera tab and click on “Quick Add”.
On the Quick Add menu, select the camera you want to activate and hit OK.
Once cameras selected, you will see the camera shows “Inactive” in Security section. Then, click on “Activation” button on the top right hand corner.
Enter the password that is wanted to be associated with the camera after initialization, or mark the check box to use the NVR’s password.
After activating the camera, the status of the camera will show “Online”.
Related Articles
ENS IPC || External 3rd Party IP Camera Initialization || Web Client
***Open SADP Tool (Downloadable from www.enssecurity.com Support->Download->Tools)*** Use the SADP Tool to set up the IP addresses for each camera respectively. Depending on the setup, Each IP camera will have the same IP scheme as the NVR’s internet ...ENS IPC || How to Default an IP Camera || Web Client
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the camera’s web interface(you will need to be on the same network as the IP camera you are trying to access) by typing in the IP address on ...Titanium IPC || How to Initialize an IP Camera || Web Client
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...ENS IPC || External 3rd Party IP Camera Initialization || Local GUI
Log into the system. Once logged in, move the mouse to the top center area and click the “arrow-like” button for the main menu access. After selecting the menu, select the Camera tab. When selecting the Camera tab, you will be taken to the camera ...Titanium IPC || How to Set Up External IP Camera || Web Client
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Note: You will need to use the IP Tool (IPTool 2.0) to configure cameras that are on an external POE switch. With this tool, you will be able to ...