ENS IPC || Unlocking ISUP Protocol in Solar cameras

ENS IPC || Unlocking ISUP Protocol in Solar cameras

By default the solar camera will not display the ISUP protocol. You will only have options for Guarding Vision.  

We can unlock ISUP by modifying the power management settings.

788B6A0B-2C2C-463c-A749-F6A8132D096C.png

Click "Power Consumption Mode" and select "Performance Mode" and click save to enable ISUP mode.

If you do not have a power consumption option, please click Systems Settings -> Power Consumption Mode

ISUP.PNG

    • Related Articles

    • ENS IPC || How to add Solar Camera on NVR through ISUP protocol || WEB GUI

      How to add Solar Camera on NVR through ISUP protocol Fig 1: Under the same network segment (recommend) We recommend that the camera and NVR be set in the same network segment before going to the site for installation, otherwise two people are ...

    • ENS IPC || Solar Camera SIM Card Setup

      T-Mobile SIM Methods of Acquiring -Retail Store purchase -Customer service phone call Lead Time of Each Method Retail Store- lead time is instant. Stores in So. California that carry: Best Buy, Target T-Mobile Store. Customer Service Phone Call- ...

    • ENS IPC || How to assemble Solar Camera SIPSB4AGZ/4-U3

      How to assemble Solar Camera SIPSB4AGZ/4-U3 1. Remove solar panel assembly and battery packs from the foam packing and place face down on a clean flat surface. 2a. Unlatch battery compartment door and open to reveal the hold-down brackets for the ...

    • ENS IPC || SN7864R-M Firmware update for Cameras

      If the cameras are of the same ENS series, firmware updates can be conducted through the NVR using two different methods. Home --> Camera Camera --> IP Camera. Hover over camera and click on circle with arrow . Click Yes. Click on Check for Update. ...

    • ENS IPC || External 3rd Party IP Camera Initialization || Local GUI

      Log into the system. Once logged in, move the mouse to the top center area and click the “arrow-like” button for the main menu access. After selecting the menu, select the Camera tab. When selecting the Camera tab, you will be taken to the camera ...