Download ENS vision from the app store.

Click the + button on the top right corner and select “Scan QR Code”

Scan the QR code underneath the faceplate of the device.

If you are not logged into your cloud account, you will be prompted to login or create an account.

After logging in or creating the cloud account, you will receive a confirmation within the app. Click next.

Follow the application instructions to turn on access point mode to continue with configuration of the doorbell.

The application will prompt you to make sure there’s no WiFi signal obstacles and ensure there is a proper connection.

Enter the SSID and password of the wireless device you intend to connect to and click next.

Click connect to network.

You will receive a prompt asking you to connect to the doorbell’s wireless network. Click Connect.

IF you are prompted to enter credentials to the device please check the back of the unit for the verification code.

The password of the wifi network to the device will be: softap_XXXXXX (where X = your device’s verification code.)

After clicking connect the doorbell will negotiate the connection to the cloud.

You will receive a message from the application following a successful connection.

The application will ask you if you would like to create an alias/nickname for the device.

You will receive an option on whether to enable the audio function on the doorbell. Enable if you intend to talk and listen through the doorbell.

Select the chime type you are using if any.

Confirm that you are using the power resistor and click “Next”.

Configure your desired alarm area.

Your doorbell will appear on the device list. Tap on the device to view.