ENS Mobile App || Dewarping Fisheye Camera on ENS Vision
Fisheye de-warp on ENS vision (Version 1.3.0.1799513)
When using the fish eye without adjusting the hardware on the camera itself. It's important to note that it is available only under certain conditions. Refer to the chart for details.
When using the P2P method to connect to the NVR, the ENS Vision interface will not include a fisheye section. It is advised to port forward the system so it will allow the fisheye de-warp.
The fisheye option becomes available when you can de-warp the camera.
These options allow you to de-warp the camera, similar to those on the NVR side. However, please note that the option for desk mounting position is not available.
Arranged in four panels, you can maneuver them like EPTZ cameras.
Please be aware that this perspective is temporary and will revert upon leaving the channel or restarting the application. These adjustments are software-driven and do not affect the camera settings permanently.
Related Articles
ENS Mobile App || ENS Vision share device to other users
ENS Mobile App || Share Device to Other Users Before sharing the device to other users make sure they have created an account first, otherwise, the device will not be shared out. They must have created the account with an email address or a phone ...ENS Mobile App || Playback on ENS Vision
(This demonstration was done on an iPhone 12 with Software version 15.6.1) 1) We will begin this demonstration on the Home screen for ENS Vision. We will start by selecting the System we’re going to perform Playback on. Tapping on this system will ...ENS Mobile App || Back up footage on ENS Vision
(This demonstration was done on an iPhone 12 with Software version 15.6.1) 1) We will begin this demo assuming we have our intended footage in mind. On this screen we have the Calendar View. We can select the year and month underneath where it says ...Diamond Mobile App || IPC Fisheye Dewarp
On the DMSS, select the device Select the fisheye camera. Tap on '' Tap on '' You can see the different view by tapping the icon on the rightENS Recorder || Adding a Recorder to ENS Vision || Local GUI
***Note: You will need to download the ENS Vision app from the phone’s respective app store.*** During the initial setup of the recorder, you will have an option to set up the network to gain internet access and enable the P2P (Platform Access) ...