Reyee General || Phone Setup for Wireless Bridge Configuration ||
Reyee || Wireless Bridge Configuration || Phone Setup
When setting up Point to Point or P2 Multipoint Wireless Bridges (WB) there are a few steps we recommend you complete before mounting the WB
-
First verify the wireless bridge or bridges that will be located on theNVR side or where your main switch and router will be located
-
Next Identify you Camera side Bridge or bridges
-
Take note of the last 4 digits of the MAC address so that you ensure correct WB during Configuration
-
Lastly you want to already have an idea of a WDS SSID Name and Password so during setup you can easily add the WB’s to each other
After mounting the NVR side WB you will need to enter your phones WiFI settings and connect to the network that the WB is Broadcast
This is why it is essential to take not of the MAC to ensure proper configuration all networks broadcasting will show WDS name of Ruijie-xXXX
In this Example we are using MAC address ending with BE3C as the NVR side WB
Once you are connected to the WB’s WDS SSID you will enter any browser on you phone (Chrome, Safari, Firefox, etc.) and enter the address 192.168.120.1
Note: If you have not created a WDS SSID bypass the creation of a password
We Recommend that even if your WB comes up as an NVR or Camera side Bridge like you want it to, go ahead and pair it again
-
Red shows where to click to Pair Again
-
Green shows the information you will change
Once Started select the Mode the WB will be in and select next
Note: In this example we are changing the CPE (Camera Side) WB to an NVR side WB
Create the WDS SSID and Password that will allow your Camera side WB’s to connect
Should show you the updated information and the ability to save the settings, Save them and allow the WB time tol reboot
Now you will repeat the steps from connecting to Broadcasted WDS SSID on CPE (Camera side) WB and ensure that when you PAIR the camera side you enter the WDS SSID that you created on the NVR Side WB
Next you will create or add the Wireless bridges to a project in the cloud app/ website.
Your Bridges should not be online with eachother and sending connectivity back and forth
Related Articles
Reyee Mobile App || Wireless Bridge Setup || Ruijie Reyee
Rujiee Reyee || Wireless Bridge Setup || Ruijie APP First Create your account and then Add A Project Verify the Wireless bridge NVR and CPE side and Scan or add the Serial number of the NVR side wireless bridge to the project. App will ask again ...Reyee General || Port Mapping || Phone App
Ruijie Reyee || Port Mapping || Phone App First Log into project Then select the router Select Port Mapping Add the ports you want to Open and the IP address that is being forwarded Verify all changes and then Save Port mapping is setup and should ...Reyee Wireless || VPN Setup || Web Gui (Cloud)
Ruijie Reyee || VPN Setup || Web Gui (Cloud) Log into Project and hover over Device Config. When the menu is populated under Gateway select VPN Select Add VPN Policy Enable the Policy and enter all the information that is asked Note: In this Example ...Reyee Wireless || AI Diagnostics || Phone App
Ruijie Reyee|| AI Diagnostics || Phone App In the event that your network is having issues with connectivity and you want to do troubleshooting or just to simply monitor your network, AI Diagnostics is fast, reliable and will give you suggestions on ...Reyee General || Project Hand Over || Phone App
Ruijie Reyee || Project Hand Over || Phone App Steps to Hand Over (Transfer) Project from user to another. Note: Both users must have a Reyee Cloud Account Login and select the Project that you intend to Hand Over Then at the top right three buttons ...