Reyee General || Port Mapping/ Port Forwarding || Web GUI

Reyee General || Port Mapping/ Port Forwarding || Web GUI

Ruijie Reyee || Port Mapping/ Port Forwarding || Web GUI

In Reyee Router Port Forwarding is called Port Mapping

First you will need to log into the Router using IP address or Domain and select More


 

Then in the more page you will select Advanced> Port Mapping

 


 

In the Port mapping list you will select add and follow the steps for the ports you want to open and ensure to add the IP of the device you want to be forwarded


 

Once done the ports and the IP address will be displayed in the list

    • Related Articles

    • Reyee General || Port Mapping || Phone App

      Ruijie Reyee || Port Mapping || Phone App First Log into project Then select the router Select Port Mapping Add the ports you want to Open and the IP address that is being forwarded Verify all changes and then Save Port mapping is setup and should ...

    • UNV General || Port Forwarding Non 1:1 Ports

      When port forwarding UNV equipment when not using a 1:1 rule (ie. port 10000 router side -> 80 equipment side) you must enable Port Mapping and manually set your external ports. Setup > Network > Port > Port Mapping

    • Reyee General || How to setup DDNS || Web Gui

      Ruijie Reyee || How to setup DDNS || Web Gui First log into the Router using IP address or Tunnel feature from Cloud Select Gateway Select Advanced> Dynamic DNS Register your domain Note: Here we are using the free NOIP option given, Registering ...

    • Reyee General || Radio Frequencies || Local Web Gui

      Ruijie Reyee || Radio Frequencies || Local Web Gui This Example uses the RG-6 First you will log into the router using the IP address Select MORE When in the More page you will then Select WLAN Under WLAN you will Select Radio Frequency From there ...

    • Reyee General || Packet Capturing (PCAP) || Web GUI

      Ruijie Reyee || Packet Capturing (PCAP) || Web GUI Packet Capturing can capture packets from a single device on the network, here are the steps Login using IP or Domain and select More In the more options select Diagnostics> Packet Capturing Add the ...