Reyee Mobile App || Port Rebooting || Ruijie Reyee

Reyee Mobile App || Port Rebooting || Ruijie Reyee

Ruijue Reyee || Port Rebooting || Reyee App

First access the project with the Reyee Switch

Note: Rebooting a port will only work for network switches; all other devices require full reboot of device and can not narrow the reboot to one port.

In your topology you will select the switch that will have the port that is in question

 

 

After selecting the port you will see the Restart button, select it and allow for the port to reboot

 

 

When completed you will get a restart successful screen, the port color will go gray and will not come back Orange until Port has fully been reset

    • Related Articles

    • Reyee Mobile App || Port Monitoring || Ruijie Reyee

      Ruijie Reyee || Port Monitoring || Reyee App Log into you project Select the switch with the port that will be monitored Select the port on the switch You will now be able to monitor the switches port including Upload and Download speed, Port Speed ...

    • Reyee Mobile App || Configuring Port Topology || Ruijie Reyee

      Ruijie Reyee || Configuring Port Topology || Phone App Note: This example will help set the devices in your network topology to match the devices connected to the port for ease of device recognition on the network. Log into your Project Select the ...

    • Reyee Mobile App || Cable Test || Ruijie Reyee

      Ruijie Reyee || Cable Test || Phone App Note: Cable Testing is possible through only Networking switches at this time Log into your project Select the switch that has the cable connection in question Select the port that will send the signal through ...

    • Reyee Mobile App || VLAN Creation || Ruijie Reyee

      Reyee || VLAN Creation || Phone App You will start with the network topology in view In the Workspace menu you will navigate to the Advanced tab and then select VLAN Config Once you are taken to the NETWORK PLANNING page you can add you new VLAN by ...

    • Reyee General || Port Mapping || Phone App

      Ruijie Reyee || Port Mapping || Phone App First Log into project Then select the router Select Port Mapping Add the ports you want to Open and the IP address that is being forwarded Verify all changes and then Save Port mapping is setup and should ...