Reyee Mobile App || VLAN Creation || Ruijie Reyee

Reyee Mobile App || VLAN Creation || Ruijie Reyee

Reyee || VLAN Creation || Phone App

 

You will start with the network topology in view

In the Workspace menu you will navigate to the Advanced tab and then select VLAN Config

 

 

 

 

 

 

 

 

 

Once you are taken to the NETWORK PLANNING page you can add you new VLAN by clicking ADD CREATE VLAN ID > SET IP ADDRESS POOL

Choose whether this VLAN will be WIRED or WIRELESS

 

 

 

 

 

 

 

 

Create you VLAN name, create you VLAN ID and create the IP address pool

Note: On this page you can also select for the VLAN to have Captive Portal Authentication

After inputting the information for the VLAN in the Add Network section you will select the Add Port, from there you will select the device and ports you want to be on the same VLAN

 

 

 

 

 

Once completed you will see the devices and ports where the VLAN exist

And your VLAN is now completed

 

    • Related Articles

    • Reyee Mobile App || IP Address Management || Ruijie Reyee

      Ruijie Reyee || IP Address Management || Ruijie Phone APP To manage IP addresses you will first need a Router capable of IP Management To manage the IP’s you will first log into your cloud account and select the Project you will want to manage IP ...

    • Reyee Mobile App || Port Monitoring || Ruijie Reyee

      Ruijie Reyee || Port Monitoring || Reyee App Log into you project Select the switch with the port that will be monitored Select the port on the switch You will now be able to monitor the switches port including Upload and Download speed, Port Speed ...

    • Reyee General || VLAN Creation || Cloud

      Reyee || VLAN Creation || Cloud You will first need to log into the Reyee Cloud Portal, create your project and ensure all devices are added and are shown in the topological view under the projects tab. Once you have selected the correct project, you ...

    • Reyee Mobile App || Cable Test || Ruijie Reyee

      Ruijie Reyee || Cable Test || Phone App Note: Cable Testing is possible through only Networking switches at this time Log into your project Select the switch that has the cable connection in question Select the port that will send the signal through ...

    • Reyee Mobile App || Wireless Bridge Setup || Ruijie Reyee

      Rujiee Reyee || Wireless Bridge Setup || Ruijie APP First Create your account and then Add A Project Verify the Wireless bridge NVR and CPE side and Scan or add the Serial number of the NVR side wireless bridge to the project. App will ask again ...