Reyee Mobile App || Wireless Bridge Setup || Ruijie Reyee

Reyee Mobile App || Wireless Bridge Setup || Ruijie Reyee

Rujiee Reyee || Wireless Bridge Setup || Ruijie APP

First Create your account and then Add A Project

Verify the Wireless bridge NVR and CPE side and Scan or add the Serial number of the NVR side wireless bridge to the project. App will ask again where to set these Wireless Bridges up in new or existing project

 

Choose the side of the Wireless bridge just scanned ensuring NVR side is closest to the NVR or Router

Create the Project Name and Management Password

Allow the devices to sync together

Wireless bridges on the CPE side whether Point to Point or Point to Multi-Point will be added to the project

Note: This example is only Point to Point

You should now have network connectivity

    • Related Articles

    • Reyee General || Phone Setup for Wireless Bridge Configuration ||

      Reyee || Wireless Bridge Configuration || Phone Setup When setting up Point to Point or P2 Multipoint Wireless Bridges (WB) there are a few steps we recommend you complete before mounting the WB First verify the wireless bridge or bridges that will ...

    • Reyee Mobile App || How to setup a Project || Ruijie Reyee

      After physically connecting the router, switch and any other Reyee product you will go ahead and scan the QR code on the back of one of the devices. In this example we have first scanned the router. After you Create the name of the project and enter ...

    • Reyee Mobile App || Port Monitoring || Ruijie Reyee

      Ruijie Reyee || Port Monitoring || Reyee App Log into you project Select the switch with the port that will be monitored Select the port on the switch You will now be able to monitor the switches port including Upload and Download speed, Port Speed ...

    • Reyee Mobile App || VLAN Creation || Ruijie Reyee

      Reyee || VLAN Creation || Phone App You will start with the network topology in view In the Workspace menu you will navigate to the Advanced tab and then select VLAN Config Once you are taken to the NETWORK PLANNING page you can add you new VLAN by ...

    • Reyee Mobile App || Cable Test || Ruijie Reyee

      Ruijie Reyee || Cable Test || Phone App Note: Cable Testing is possible through only Networking switches at this time Log into your project Select the switch that has the cable connection in question Select the port that will send the signal through ...