Reyee Wireless || Add Wireless Bridges Through Wired Connection || Web GUI

Reyee Wireless || Add Wireless Bridges Through Wired Connection || Web GUI

Ruijie Reyee || Add Wireless Bridges Through Wired Connection || Web GUI

 

In the event in which you are adding Reyee Wireless Bridges to a closed network that does not have a Internet /DHCP server you wilill breed to manually address the Wireless Bridges. Here are the steps.

 

First you will statically address your computer to match the IP scheme of the Reyee Bridges’ default IP address



 

Then you will log into the Reyee WB with default IP 10.44.77.254

Start on Recorder side (nearest to router)


 

After logging in you will see that if the WB were both already installed they will find each other both with Default IP Addresses.


 

Select LAN so we can statically address the two WB’s


 

Add IP Address that matches the rest of the Isolated network

 

Before Making the Change you will be prompted to create a new Management password


 

Now you will be logged out and the new IP address will populate in the URL box


 

Once Logged back in you will change the IP address of the Camera Side WB (CPE)

 

Change to Static Address and you will again match the IP scheme

 

New IP of CPE side will now be populated and information and IP addresses can now communicate on both sides of the connected WB’s

    • Related Articles

    • Reyee Wireless || Wireless Blocklist/Allowlist || Web GUI

      Ruijie Reyee || Wireless Blocklist/Allowlist || Web GUI To add devices to Block and Allow List’s you will need to Log into your cloud account and find the project you will be adding this list to In project you will hover over Device Confi.> Wireless> ...

    • Reyee Wireless || VPN Setup || Web Gui (Cloud)

      Ruijie Reyee || VPN Setup || Web Gui (Cloud) Log into Project and hover over Device Config. When the menu is populated under Gateway select VPN Select Add VPN Policy Enable the Policy and enter all the information that is asked Note: In this Example ...

    • Reyee Wireless || Wireless Radio Frequency Enabling/ Disabling || Web GUI

      Ruijie Reyee || Wireless Radio Frequency Enabling/ Disabling || Web GUI This will serve as a guide to Enable, Disable and add Radio Frequencies to a project First log into your Project t> Device Config > Radio Under the Radio section you will see ...

    • Reyee Wireless || Wireless Rate Limits || Web GUI

      Ruijie Reyee || Wireless Rate Limits || Web GUI Log into your Reyee Cloud Account and then navigate to the Project you will be adding Wireless Rate limits to Once in the project you will hover Device Config. > Wireless then select Rate Limit You will ...

    • Reyee Wireless || Captive Portal Creation || Web GUI

      Ruijie Reyee || Captive Portal Creation || Web GUI To Create a Captive portal you will first need to log into your Reyee Cloud account through https://cloud-us.ruijienetworks.com/ Next navigate to your project Hover over Auth And Accounts under ...