Reyee Wireless || Wireless Radio Frequency Enabling/ Disabling || Web GUI

Reyee Wireless || Wireless Radio Frequency Enabling/ Disabling || Web GUI

Ruijie Reyee || Wireless Radio Frequency Enabling/ Disabling || Web GUI

 

This will serve as a guide to Enable, Disable and add Radio Frequencies to a project

 

First log into your Project t> Device Config > Radio

Under the Radio section you will see both 2.4 GHz and 5 GHz and the options to enable or disable. This section also has more advanced options also like client limits, channel width and Offline threshold.


To Add a Radio Frequency simply

Project > Device Config >Radio > Add Radio > Set up configurations

New Radio Frequency will populate with the same options to change or toggle on and off

    • Related Articles

    • Reyee General || Radio Frequencies || Local Web Gui

      Ruijie Reyee || Radio Frequencies || Local Web Gui This Example uses the RG-6 First you will log into the router using the IP address Select MORE When in the More page you will then Select WLAN Under WLAN you will Select Radio Frequency From there ...

    • Reyee Wireless || Wireless Rate Limits || Web GUI

      Ruijie Reyee || Wireless Rate Limits || Web GUI Log into your Reyee Cloud Account and then navigate to the Project you will be adding Wireless Rate limits to Once in the project you will hover Device Config. > Wireless then select Rate Limit You will ...

    • Reyee Wireless || Wireless Blocklist/Allowlist || Web GUI

      Ruijie Reyee || Wireless Blocklist/Allowlist || Web GUI To add devices to Block and Allow List’s you will need to Log into your cloud account and find the project you will be adding this list to In project you will hover over Device Confi.> Wireless> ...

    • Reyee Wireless || Add Wireless Bridges Through Wired Connection || Web GUI

      Ruijie Reyee || Add Wireless Bridges Through Wired Connection || Web GUI In the event in which you are adding Reyee Wireless Bridges to a closed network that does not have a Internet /DHCP server you wilill breed to manually address the Wireless ...

    • Reyee General || SSID Creation || Web Gui

      Rujie Reyee || SSID Creation || Web Gui To get Internet access wirelessly you will first need to create an SSID to broadcast the Public or Private Wireless Internet First step will be to log in to your cloud management portal Go to projects and then ...