Teltonika || Adjusting LAN IP ||

Teltonika || Adjusting LAN IP ||

Teltonika || Adjusting the LAN IP Address

Author: ENS Technical Support
Date: 09/17/2026
Product / Category: Teltonika

Article Description

Change the LAN port IP address on a Teltonika router.

Applies To

  • Models: RUT241098000, RUT956A00A00

Requirements / Before You Begin

  • Teltonika router
  • Laptop connected to the router (LAN or Wi-Fi)
  • Router login credentials (default is usually admin / admin01, or as printed on the router label)

Procedure

1. Log in to the router

  1. Open a web browser.
  2. Go to 192.168.1.1 (default IP).
  3. Log in with your username and password.

2. Open the LAN interface

  1. Go to Network > LAN.
  2. Choose to either edit the current LAN entry or add another.

3. Change the LAN IP

  1. Under the General Settings tab, set IPv4 address to the desired LAN IP.
    • Example: change 192.168.1.1 to 192.168.190.1 (or another private range such as 10.0.0.1).
  2. Set IPv4 netmask. This is usually 255.255.255.0 unless you need a different subnet.
  3. Click Save & Apply.

The router restarts the network when you apply the changes.

Verification

Once saved, the Network > LAN page should show the updated IP address.

Notes / Troubleshooting

  • After applying, the router’s old address stops working. Open the new IP in your browser (for example, 192.168.190.1) to log back in.
  • If the page doesn’t load, reconnect your laptop or renew its IP address so it picks up a new address in the new subnet.