Teltonika || Firmware Update with Teltonika
Author: ENS Technical Support
Date: 09/17/2026
Product / Category: Teltonika
Article Description
Steps to update the firmware on a Teltonika router, either online or with a manually downloaded file.
Applies To
- Models: RUT241098000, RUT956A00A00
Requirements / Before You Begin
- Teltonika router with a valid network connection
- Laptop connected to the router, preferably by Ethernet cable
- Router login credentials (default is usually admin / admin01, or as printed on the router label)
- For the manual method: the firmware file (.bin) downloaded to your laptop
Warning: Never power off the router or interrupt the connection during a firmware update. See the Firmware Disclaimer in Notes / Troubleshooting.
Procedure
1. Log in to the router
- Open a web browser.
- Go to 192.168.1.1 (default IP).
- Log in with your username and password.

2. Update online (requires internet access)
- Go to System > Firmware.
- Click Check for Updates. If a new version is available, it will be shown.
- Click Upgrade.
- Wait about 2 to 5 minutes for the update to finish. The router reboots automatically.

This method requires the router to have internet access.
Optional: Manual update (offline)
- On your laptop, go to Teltonika’s firmware download site: https://wiki.teltonika-networks.com
- Find your router model and download the latest firmware. The file ends in .bin.
- In the router WebUI, go to System > Firmware.
- Click Choose File and select the .bin file. The file uploads as soon as you select it.
- Click Upgrade.
- Confirm and wait until the router reboots (about 2 to 5 minutes).

Warning: Do not interrupt power or close the browser while updating.
Verification
- Log back in to the router WebUI after it reboots.
- Go to System > Firmware and check the firmware build date. It should match the firmware you applied.

Notes / Troubleshooting
Firmware Disclaimer
If communication is interrupted during a firmware update, there is a risk of damaging the device. Once the update has begun, any interruption can leave the device in a nonfunctional state.
- Never turn off power during a firmware update. Power interruption to the router or to the device performing the update can cause the update to fail.
- Loss of network communication, or disconnecting a USB or microSD card, can also cause the update to fail. Make sure the network is reliable and won’t drop. A wired connection is preferred.