Teltonika || SSID Creation
Author: ENS Technical Support
Date: 09/17/2026
Product / Category: Teltonika
Article Description
Create or edit an SSID (Wi-Fi network name) on a Teltonika router.
Applies To
- Models: RUT241098000, RUT956A00A00
Requirements / Before You Begin
- Teltonika router
- Laptop connected to the router (LAN or Wi-Fi)
- Router login credentials (default is usually admin / admin01, or as printed on the router label)
Procedure
1. Log in to the router
- Open a web browser.
- Go to 192.168.1.1 (default IP).
- Log in with your username and password.

2. Open the SSID page
- Go to Network > Wireless > SSIDs.
- Click Add.

Set the following:
- Enable: turned on
- Mode: Access Point
- SSID: the name of your Wi-Fi network (for example, MyWiFi)
- Network: select an existing network or create one (lan, guest, etc.)
- Device: typically radio0 (2.4 GHz)
- Click Save & Apply.
This creates a new Wi-Fi network on the selected band.

Verification
On a phone, laptop, or other Wi-Fi device, scan for networks and confirm the new SSID appears.
Notes / Troubleshooting
- A new SSID has no password until wireless security is set. Configure encryption and a password in the SSID’s security settings before using it. (This note is my addition. Confirm the exact setting name on the router.)
- If the SSID doesn’t appear, confirm it is enabled and that the radio device (radio0) is turned on.