Teltonika || SSID Creation ||

Teltonika || SSID Creation ||

Teltonika || SSID Creation

Author: ENS Technical Support
Date: 09/17/2026
Product / Category: Teltonika

Article Description

Create or edit an SSID (Wi-Fi network name) on a Teltonika router.

Applies To

  • Models: RUT241098000, RUT956A00A00

Requirements / Before You Begin

  • Teltonika router
  • Laptop connected to the router (LAN or Wi-Fi)
  • Router login credentials (default is usually admin / admin01, or as printed on the router label)

Procedure

1. Log in to the router

  1. Open a web browser.
  2. Go to 192.168.1.1 (default IP).
  3. Log in with your username and password.

2. Open the SSID page

  1. Go to Network > Wireless > SSIDs.
  2. Click Add.

3. Configure the new SSID

  1. Set the following:
    • Enable: turned on
    • Mode: Access Point
    • SSID: the name of your Wi-Fi network (for example, MyWiFi)
    • Network: select an existing network or create one (lan, guest, etc.)
    • Device: typically radio0 (2.4 GHz)
  2. Click Save & Apply.

This creates a new Wi-Fi network on the selected band.

Verification

On a phone, laptop, or other Wi-Fi device, scan for networks and confirm the new SSID appears.

[Insert screenshot: SSID listed on the SSIDs page or on a device]

Notes / Troubleshooting

  • A new SSID has no password until wireless security is set. Configure encryption and a password in the SSID’s security settings before using it. (My addition, so confirm the exact setting name on the router.)
  • If the SSID doesn’t appear, confirm it is enabled and that the radio device (radio0) is turned on.